Instructions for the user – Smeg ALFA31XE User Manual
Page 8
Instructions for the user
4.3 Program selection
This oven has 10 different cooking programs, including:
5 preset programs for fan-mode cooking (P1 to P5);
4 user-editable programs for fan-mode cooking (P6 to P9),
1 "easy" user-editable program for fan-mode cooking.
The following table shows the parameters for each program.
Uprh
preheating
temperature
Ut °C
cooking
temperature
U Ct
cooking time
P1
170 °C
170 °C
20 minutes
P2
175 °C
175 °C
20 minutes
P3
180 °C
180 °C
20 minutes
P4
190 °C
190 °C
20 minutes
P5
200 °C
200 °C
20 minutes
P6
Editable
Editable
Editable
P7
Editable
Editable
Editable
P8
Editable
Editable
Editable
P9
Editable
Editable
Editable
P10
Same as edited
Ut°C
Editable
Editable
4.4 Fan mode cooking
Use the knob to select one of the preset programs (P1 – P5).
The display shows the parameters of the selected program (tc = cooking
time; temperature in degrees Centigrade and program number, e.g. P1).
Press START to confirm the start of the program.
The program starts, performing the preheating stage; the display shows
“PrEh”.
When the preheating is complete, a "BEEP" sounds to indicate that
cooking can start.
Press START to start cooking.
(If START is not pressed after the beep, the temperature is held constant
for about 10 minutes, after which it will start to drop for a period up to a
maximum time of 20 minutes, counted from when the beep sounded. After
this the oven switches off. During this stage, the display shows the
parameters of the selected program).
N.B. – although this is not recommended in terms of cooking quality, the
program can be started even before the preheating temperature is
reached by pressing START.
During cooking, the display shows the time left until the end of the cooking
process and the temperature set. During the last minute of cooking, the
25