Sony MDS-W1 - Manual (Page 36)

Editing Recorded MDs
36 EN
Moving Recorded Tracks
(Move Function)
Use the Move Function to change the order of any
track within an MD. After you move a track, the track
numbers between the new and old track positions are
automatically renumbered.
Example: Moving track C to track position 2
1
While the deck is stopped, playing, or pausing,
press MENU/NO to display EDIT menu.
2
Turn AMS to select “Move”, then press AMS or
YES.
3
Turn AMS to select the track to be moved and
press AMS or YES.
4 Turn AMS until the new track position appears.
3
Turn AMS to select the first track of the two to be
combined and press AMS or YES.
The display for selecting the second track appears
and the deck repeats the portion where the two
tracks will join (i.e., the end of the first track and
the beginning of the succeeding track).
4 Turn AMS to select the second track of the two to
be combined and press AMS or YES.
“Complete
” appears for a few seconds.
If both of the combined tracks have track titles, the
title of the second track is erased.
To cancel the Combine Function
Press MENU/NO or p.
z
You can undo the Combine Function
Use the Undo Function immediately after you combined
the tracks (see page 41).
Note
If “ Impossible” appears in the display, the tracks cannot
be combined. This sometimes happens when you’ve edited
the same track many times, and is due to a technical
limitation of the MD system, not a mechanical error.
First track Succeeding track
Track
number
Moving
Track C moves to
track position 2
New track position
Track number to be moved
≠ AMS ±
p
0 ) r
·
§ EJECT
P
§ EJECT
≠ AMS ±
p
0 ) r
· P
≠ AMS ±
MENU/NO MENU/NO YES YES