Sierra Wireless Overdrive - Manual (Page 104)

96 Settings
Section 5J
Configuring the Router Tab
ࡗ
Basic Panel (page 96)
ࡗ
LAN Panel (page 97)
ࡗ
Port Forward Panel (page 101)
ࡗ
Port Trigger Panel (page 103)
ࡗ
DMZ Panel (page 104)
ࡗ
Resetting the Software to Default Settings (page 105)
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Router .
4. Depending on the settings you want to configure, click one of the panels:
Ⅲ
Basic . See “Basic Panel” on page 96.
Ⅲ
LAN . See “LAN Panel” on page 97.
Ⅲ
Port Forward . See “Port Forward Panel” on page 101.
Ⅲ
Port Trigger . See “Port Trigger Panel” on page 103.
Ⅲ
DMZ . See “DMZ Panel” on page 104.
Basic Panel
To access this panel:
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Router > Basic .
From this window, you can enable or disable these features, and perform these actions:
●
Port forwarding . See “Port Forward Panel” on page 101.
●
Port triggering . See “Port Trigger Panel” on page 103.
●
DMZ . See “DMZ Panel” on page 104.
●
UPnP (universal plug and play). See “UPnP (Universal Plug and Play)” on page 97.
●
SPI (stateful packet inspection). See “SPI (Stateful Packet Inspection)” on page 97.
●
Router Settings Reset . See “Resetting the Software to Default Settings (Through the Browser
Interface)” on page 107.