Tips, Extending battery life, 6c. tips – Sierra Wireless Overdrive User Manual

Page 127

Advertising
background image

Resources 119

Re

sou

rces

Section 6C

Tips

ࡗ

Extending Battery Life (page 119)

ࡗ

Device Location (page 120)

ࡗ

Improving Signal Strength (page 120)

ࡗ

Improving 3G Network Service (page 120)

ࡗ

Improving Wi-Fi Performance (page 121)

ࡗ

Security Tips (page 122)

ࡗ

Finding the MAC Address (page 122)

ࡗ

Finding the IP Address (page 123)

Extending Battery Life

●

When you’re not using the device, turn it off, or end the 3G/4G connection. (Click

Disconnect

on

the home page.)

●

Connect the device, through the USB to Micro B cable, to the AC charger or a computer, and
disable Wi-Fi. See “Disabling Wi-Fi When Connected Through USB” on page 90.

●

Adjust the LCD — do one or more of the following:

Ⅲ

Turn off the LCD (

Advanced settings > Device > Display > LCD Backlight

).

Ⅲ

Decrease the brightness of the LCD (

Advanced settings > Device > Display > Backlight

Settings > On Battery/USB Power

).

Ⅲ

Set the LCD to turn off sooner. See “Setting the LCD Timeout” on page 69.

●

Configure the setting (for when battery powered or connected via USB) to “Better battery life”
(

Advanced settings > Wi-Fi > Network > Battery or USB Powered

).

●

Enable standby (low power) mode. See “Standby (Low Power) Mode” on page 46.

●

Turn off the lighting of the power button

(i.e. LED) (

Advanced settings > Device > Display >

Power Button LED

).

●

Limit the number of Wi-Fi users (

Advanced settings > Wi-Fi > Network > Max Number of Users

).

●

If you have 3G but not 4G coverage, set

WAN mode

to 3G only (

Advanced settings > WAN >

Setup > WAN Mode

).

●

If GPS is enabled and you’re using your device from the same location, set

GPS Mode

to

One-time. See “Setting the GPS Mode” on page 93.

Advertising