Sony CFD-G30L - Manual (Page 23)

Setting Up 23 GB
Setting Up
Setting Up
Choosing the
power sources
You can use the mains or batteries
as a power source.
1 to the mains
1 Connecting the mains lead
Insert one end of the supplied mains lead to the AC
IN socket located at the rear of the player, and the
other end to the mains.
Adjusting the voltage (CFD-G30/G50 only)
Be sure to set the VOLTAGE
SELECTOR (at the bottom) to
your local power supply.
2 Using the player on batteries
Insert eight R20 (size D) batteries (not supplied) into
the battery compartment.
To use the player on batteries, disconnect the mains
lead from the player.
Replacing batteries
Replace the batteries when the OPR/BATT indicator
dims or when the player stops operating. Replace all
the batteries with new ones.
AC IN
2 Battery compartment
continued
Notes
• Before you replace the
batteries, be sure to
take out the CD from
the player.
• CFD-G50/G50L only:
When you operate the
player with the
batteries, you cannot
turn on the player with
remote.