Sony BC-TRA User Manual

Battery charger chargeur de batterie, Bc-tra, Warning

Advertising
background image

2-582-596-22(1)

BC-TRA

Operating Instructions

Mode d’emploi

Manual de instrucciones

© 2005 Sony Corporation Printed in Japan

A

•The BC-TRA battery charger can only be used to charge a

lithium ion type “InfoLITHIUM” battery pack (A series).

•This unit cannot be used to charge a nickel cadmium

type or nickel metal hydride type battery pack.

•“InfoLITHIUM” A series battery pack has the

mark.

•“InfoLITHIUM” is a trademark of Sony Corporation.

•Le chargeur de batterie BC-TRA ne peut être utilisé que

pour la recharge de batteries au lithium-ion de type
« InfoLITHIUM » (série A).

•Ce chargeur ne peut pas être utilisé pour charger les

batteries au nickel-cadmium ou aux hydrures
métalliques de nickel.

•Les batteries rechargeables « InfoLITHIUM » de série A

portent la marque

.

•« InfoLITHIUM » est une marque de fabrique de Sony

Corporation.

B

CHARGER V
mark
Repère de
CHARGER
V

CHARGE lamp
Témoin CHARGE

Battery pack
Batterie

AC input terminal
Borne d’entrée CA

BATTERY V mark
Repère de
BATTERY
V

NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS 1363 is fitted to this
equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse
of the same rating as the supplied one and approved by ASTA
or BSI to BS1362 (i.e., marked with

or

mark) must be used.

If the plug supplied with this equipment has a detachable fuse
cover, be sure to attach the fuse cover after you change the fuse.
Never use the plug without the fuse cover. If you should lose the
fuse cover, please contact your nearest Sony service station.

English

Français

WARNING

To prevent fire or shock hazard, do not expose the unit to
rain or moisture.

To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.

Notes on Use

Precautions on Use

• Connect the battery charger to an available wall socket. Even

though the CHARGE lamp of this battery charger is off, it is
not disconnected from the power source. If any trouble occurs
while the unit is in use, unplug the battery charger from the
wall socket to disconnect the power source.

• Do not use the battery charger placed in a narrow space, such

as between a wall and furniture.

• This unit cannot be used to charge a nickel cadmium type, or

nickel metal hydride type battery pack.

• Attach the battery pack to the unit firmly when you charge the

battery pack.

• The battery terminal may be damaged if the battery pack is not

attached correctly.

• To protect the battery pack, remove the battery pack from the

unit within 24 hours after the charging is completed.

• Do not expose the battery charger to any shock or force such as

by hammering, dropping or stepping on it.

• Keep the unit away from a TV or AM receivers.
In particular, noise from the device may enter a TV or radio if

it is placed nearby.

• Unplug the unit from the wall socket if it will not be used for

extended period of time. To disconnect the mains lead, pull it
out by the plug. Never pull the mains lead itself.

• Be sure that nothing metallic comes into contact with the metal

parts of the unit. If it does, a short may occur and the unit may
be damaged.

Where not to place this unit

Regardless of whether this unit is in use or in storage, do not
place it in any of the following locations. Doing so may lead to
breakdown.
• Locations of extremely high temperature

The temperature gets extremely high inside a car with the
windows closed in summer or in strong sunshine, and leaving
the unit inside may cause it to be deformed or break down.

• In direct sunlight or near a heater

There is a risk of deformation or breakdown.

• Locations of excessive vibration
• Locations with strong electromagnetism or radiant rays
• Locations with excessive sand

In locations such as the seashore and other sandy areas or
where dust clouds occur, protect the unit from sand and dust.
There is a risk of breakdown.

Maintenance

• Wipe the unit with a soft dry cloth when it is dirty.
• If the unit is very dirty, wipe it using a cloth with a little

neutral solvent added, and then wipe it dry again.

• Do not use thinners, benzine, alcohol, etc., as they will damage

the surface of the unit.

• When you use chemical cleaning clothes, refer to their

instruction manual.

• Using a volatile solvent like an insecticide, or keeping the unit

touching a rubber or vinyl plastic product for a long time may
cause a deterioration or damage to the unit.

Warranty for Recorded Content

Contents of the recording cannot be compensated if recording or
playback is not made due to a malfunction of the battery pack,
battery charger, etc.

To Charge the Battery Pack

Charging by attaching the battery pack to this unit.
1 Attach the battery pack. (See Illustration A)

Align the battery V mark with the charger V mark and insert
the battery in the direction of the arrow until it clicks into
place.

2 Connect the mains lead to the battery charger and then

to a wall socket. (See Illustration B)
The CHARGE lamp (orange) will light up and charging will
begin.
When the CHARGE lamp goes out, normal charging is
completed (Normal charge).
For a full charge, which allows you to use the battery longer
than usual, leave the battery pack in place for approximately
another one hour (Full charge).

To remove the battery pack

Slide the battery out in the opposite direction to when it was
fitted.

Charging time

The following table shows the charging time for a battery pack
that is discharged completely.

• Approximate number of minutes to fully charge an empty

battery pack (Full charging time).

• Numbers in parentheses indicate the time to charge normally

(Normal charging time).

• To ascertain the battery life, refer to the instruction manual of

the camera that you use.

• The charging time may differ depending on the condition of

the battery pack or the temperature of the environment.

Charging temperature

The temperature range for charging is 0 °C to +40 °C.
However, to provide maximum battery efficiency, the
recommended temperature range when charging is +10 °C to
+30 °C.

To use the battery pack quickly

You can remove the battery pack from the unit and use it even
though the charging is not completed yet. However, the time
that the battery pack can be used differs depending on the
charging time.

Notes

• Check if the battery pack is attached to this unit firmly when

the CHARGE lamp does not light.

• When a fully charged battery pack is installed, the CHARGE

lamp will light up once, then go out.

• When charging a battery pack which has not been used for a

long time, it may take longer than usual to charge.

Do not connect the battery charger to a voltage adaptor
(travel converter) for overseas travel. This may result in
overheating or other malfunction.

Troubleshooting

When the CHARGE lamp blinks, check through the following
chart.

Specifications

Input rating

100 - 240 V AC 50/60 Hz 5 W

Output rating

Battery charge terminal:
8.4 V DC 350 mA

Operating temperature

0 °C to +40 °C

Storage temperature

–20 °C to +60 °C

Dimensions

Approx. 42

Ч 37 Ч 75 mm (w/h/d)

(1

11

/

16

Ч 1

1

/

2

Ч 3 in.)

Mass

Approx. 65 g (2.3 oz.)

Design and specifications are subject to change without notice.

AVERTISSMENT

Afin d’éviter tout risque d’incendie ou d’électrocution, ne
pas exposer cet appareil à la pluie ou à l’humidité.

Afin d’écarter tout risque d’électrocution, garder le boîtier
fermé.
Ne confier l’entretien de l’appareil qu’à un technicien
qualifié.

Remarques sur l’utilisation

Précautions d’emploi

• Raccordez le chargeur de batterie à une prise secteur. Même

lorsque le témoin CHARGE est éteint, le chargeur n’est pas
isolé de la source d’alimentation. En cas de problème,
débranchez immédiatement le cordon d’alimentation de la
prise murale pour isoler le chargeur de la source
d’alimentation.

• N’utilisez pas le chargeur à un endroit exigu, par exemple

entre un mur et un meuble.

• Ce chargeur ne peut pas être utilisé pour charger les batteries

au nickel-cadmium ou aux hydrures métalliques de nickel.

• Rattachez correctement la batterie rechargeable à l’appareil

lorsque vous la rechargez.

• La borne de la batterie peut être endommagée si la batterie

n’est pas rattachez correctement.

• Pour protéger la batterie, ne pas la laisser plus de 24 heures sur

le chargeur après la recharge.

• Ne pas exposer le chargeur de batterie à un choc ni le

soumettre à une force, comme par exemple taper dessus avec
un marteau, le laisser tomber ou marcher dessus.

• Ne pas laisser le chargeur à proximité d’un téléviseur ou d’un

récepteur AM.
Il peut parasiter la réception télévisée ou radio s’il est placé
trop près.

• Débranchez l’appareil de la prise murale s’il ne doit pas être

utilisé pendant longtemps. Pour débrancher le cordon, tirez
sur la fiche. Ne tirez jamais sur le cordon proprement dit.

• Evitez que des objets métalliques ne touchent les parties

métalliques du chargeur. Un court-circuit pourrait se produire
et endommager l’appareil.

Endroits à éviter

Qu’il soit en service ou rangé, le chargeur ne devra pas être posé
dans les types d’endroits suivants au risque de l’endommager.
• Endroits à température très élevée

Ne posez pas le chargeur dans une voiture fermée en plein été
ou lorsqu’elle est garée en plein soleil car la température de
l’habitacle atteint des degrés susceptibles d’endommager le
dispositif ou de la déformer.

• Sous les rayons de soleil ou près d’un chauffage

Risques de déformation ou de détérioration.

• Endroits soumis à de fortes vibrations
• Endroits exposés à un électromagnétisme ou à des radiations

puissantes

• Environnement très sablonneux

En bord de mer et dans les autres types de régions sableuses
ou soumises à des nuages de poussière protégez le chargeur
du sable et de la poussière. Risques de détérioration.

Entretien

• Essuyez l’appareil avec un chiffon sec et doux lorsqu’il est sale.
• Lorsqu’il est très sale, essuyez-le avec un chiffon imprégné

d’un peu de solvant neutre, et séchez-le bien.

• Ne pas utiliser de diluants, benzine, alcool, etc. car ils peuvent

endommager la surface de l’appareil.

• Si vous utilisez des tissus de nettoyage chimique, lisez

attentivement le mode d'emploi.

• L’appareil peut se décolorer ou être endommagé à l’emploi de

solvants volatils, comme les insecticides, ou s’il reste
longtemps au contact de produits en caoutchouc ou en vinyle.

Garantie concernant l’enregistrement

Aucune compensation ne peut être accordée si l’enregistrement
ou la lecture n’a pas pu être effectué en raison d’un problème de
batterie, de chargeur, etc.

Pour charger la batterie

Mettez la batterie sur le chargeur pour la recharger.
1 Rattachez la batterie (Voir l’illustration A).

Alignez le repère de batterie V sur le repère de chargeur V et
insérez la batterie dans le sens de la flèche jusqu’à ce qu’elle
s’encliquette.

2 Raccordez le cordon d’alimentation au chargeur puis à

une prise secteur (Voir l’illustration B).
Le témoin CHARGE (orange) s’allume et la recharge
commence.
Lorsque le témoin CHARGE s’éteint, la recharge normale est
terminée (Recharge normale).
Pour une recharge complète, qui permettra d’utiliser la
batterie plus longtemps, laissez la batterie en place encore
une heure environ (Recharge complète).

Pour enlever la batterie

Faites glisser la batterie dans le sens opposé de l’insertion.

Temps de recharge

Le tableau suivant indique le temps de recharge quand la
batterie est complètement déchargée.

• Temps de recharge approximatif en minutes pour recharger

complètement une batterie vide (Temps de recharge complète).

• Les chiffres entre parenthèses indiquent le temps normal

(Temps de recharge normale).

• Voir le mode d’emploi de la caméra utilisé pour l’autonomie

de la batterie.

• Le temps de recharge varie selon l’état de la batterie et la

température ambiante.

Température de recharge

La batterie peut être rechargée à une température comprise
entre 0 °C et +40 °C. Cependant, pour que son efficacité soit
optimale, il est conseillé de la recharger entre +10 °C et +30
°C.

Pour utiliser rapidement la batterie

Vous pouvez utiliser la batterie même si elle n’a pas été
complètement chargée. Son autonomie sera toutefois moins
grande.

Remarques

• Vérifiez si la batterie est bien fixée au chargeur si lorsque

témoin CHARGE ne s’allume pas.

• Quand vous insérez une batterie pleine dans le chargeur, le

témoin CHARGE s’allume puis s’éteint.

• Il faudra probablement plus de temps que d’habitude pour

recharger une batterie qui n’a pas été utilisée depuis
longtemps.

Si vous voyagez à l’étranger, n’utilisez pas le chargeur avec
un adaptateur de tension (adaptateur portatif). Cela peut
provoquer une surchauffe et des dysfonctionnements.

En cas de panne

Lorsque le témoin CHARGE clignote, consultez le tableau
suivant.

Spécifications

Tension déntrée

Secteur 100 - 240 V 50/60 Hz 5W

Tension de sortie

Borne de recharge de la batterie:
CC 8,4 V 350 mA

Température de fonctionnement

0 °C à +40 °C

Température d’entreposage –20 °C à +60 °C
Dimensions hors tout

Env. 42

Ч 37 Ч 75 mm (l/h/p)

Poids

Env. 65 g

La conception et les spécifications peuvent être modifiées sans
préavis.

Please contact your nearest Sony dealer in connection with the product
with the problem.

Remove the battery that is being charged and firmly attach the same
battery again.

The CHARGE lamp blinks again:
Install another battery pack.

The CHARGE lamp lights up
and does not blink again:
If the CHARGE lamp goes out
because the charging time has
passed, there is no problem.

The CHARGE lamp blinks again:
The problem is with this unit.

The CHARGE lamp lights up
and does not blink again:
If the CHARGE lamp goes out
because the charging time has
passed, the problem is with the
battery pack first installed.

Veuillez contacter votre revendeur Sony et lui apporter l’appareil qui ne
fonctionne pas.

Retirez la batterie chargée et remettez-la fermement en place.

Si le témoin CHARGE
clignote encore:
Installez une autre batterie
rechargeable.

Si le témoin CHARGE s’allume mais
ne clignote pas de nouveau:
Si le témoin CHARGE s’éteint parce
que la recharge est terminée, il n’y a
aucun problème.

Si le témoin CHARGE
clignote de nouveau:
Le problème vient de
l’appareil.

Si le témoin CHARGE s’allume mais
ne clignote pas de nouveau:
Si le témoin CHARGE s’éteint parce
que la recharge est terminée, le
problème vient de la première
batterie rechargeable installée.

Battery Pack

NP-FA50

NP-FA70

Full charging time

185

275

Normal charging time

(125)

(215)

Battery charger
Chargeur de Batterie

Batterie rechargeable

NP-FA50

NP-FA70

Temps de recharge

185

275

complète
Temps de
recharge

(125)

(215)

normale

Advertising