Sony DPP-FP50 - Manual (Page 20)

20 GB
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Connecting a camera
or other external
device
To print an image from a camera or other
external device, connect it to the printer .
You can connect an external device that
supports mass storage system. For how to
connect the PictBridge-compliant digital
camera, see page 57.
1
Set your digital camera or other
external device ready for printing
with the Mass Storage-compliant
printer.
The settings and operations that are
necessary before connection differ
depending on the external device you
use. For details, see the operating
instructions of the external device. (In
case of Sony Cyber-shot digital
camera, for example, select “Normal”
mode for the “USB Connect”. )
2
Connect a camera or an external
device to the PictBridge/CAMERA
connector of the printer.
Use the USB connecting cable
supplied with the digital camera.
Open the cover and to
the PictBridge/CAMERA
connector (USB A-TYPE)
To USB
connector
Camera or
other external
device
Notes
• The type of USB connecting cable you should
use may differ depending on the digital
camera. Use a USB connecting cable with an
A-TYPE connector for the printer and an
appropriate type for your digital camera.
• We cannot guarantee connection with all
types of mass storage devices.
• Use a commercially available USB cable
shorter than 3m in length.
• While the access indicator of the external
device is flashing, never turn off the power
nor remove the USB cable. The data inside
the external device may be damaged. We
cannot guarantee any damages that may be
caused by data loss or damage.
001GBFP5004PRE-UC/CED.p65 3/11/05, 4:22 PM 20