SIIG 104-0722A - Manual (Page 6)

6
2. At the Found New Hardware window,
click Locate and install driver software
(recommended)
, then click Continue.
3. Click I don't have the disk. Show me other
options .
4. Insert the driver CD. Click Browse my
computer for driver software .
5. For 32-bit: Type in D:\32-bit, then click
Next . (Change D: to match your CD/DVD-
ROM drive letter)
For 64-bit: Type in D:\64-bit, then click
Next . (Change D: to match your CD/DVD-
ROM drive letter)
6. At The software for this device has been
successfully installed , click Close.
7. Repeat steps 3-6 to complete the installation.
Windows XP (32-/64-bit) / Server 2003
(32-/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, select
No, not this time , click Next. (Skip this step
if not prompted)