Samsung 173P - Manual (Page 20)

English > Main > Setup > Installing VESA compliant mounting
Connecting Your
Monitor
Installing the
Monitor Driver
Installing VESA
compliant
mounting
Wall Mounting the Monitor | Attaching a base | Pivot Stand
Wall Mounting the Monitor
Attaching a base
NOTE: This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad.
Fold the monitor stand. Turn it so that the side to which the cable is connected faces down. Attach
the VESA Mounting Bracket to the bottom side of the stand. Align the holes of the bracket with those
in the VESA stand, and fasten it tightly in place with four screws.
1. VESA Stand
2. VESA Mounting Brkt
Caution :The stand is made of aluminum. Keep it from getting nicked or scratched.
Pivot Stand