Sharp KC-C150U - Manual (Page 14)

E-12
CLEAN AIR & HUMIDIFY MODE
OPERATION
Use the Clean Air & Humidify Mode to quickly clean the air, reduce odors and
to humidify.
Fill Water Tank. (See E-11)
Use the Clean Air Mode when additional humidity is not required.
About Automatic Humidify Mode
1
2
3
Press the FAN SPEED Button to select the de-
sired fan speed. (See E-13)
Press the CLEAN AIR & HUMIDIFY MODE
Button on the unit display.
• If the power cord was not unplugged between uses, the
unit will automatically re-start at the previously selected
settings.
1
2
Press the CLEAN AIR MODE Button on the display.
• If the power cord was not unplugged between uses, the
unit will automatically re-start at the previously selected
settings.
Press the FAN SPEED BUTTON to select the
desired fan speed. (See E-13)
About the Temperature/Humidity Sensors. The Tem-
perature/Humidity sensors automatically detect and
adjust humidity according to changes in room tem-
perature. Depending on the size and humidity of the
room, humidity may not reach 45-55%. In such cases,
it is recommended that CLEAN AIR & HUMIDIFY/MAX
MODE be used.
CLEAN AIR MODE
Temperature
~64.4ºF
64.4ºF~75.2ºF
75.2ºF~
Humidity
55%
50%
45%
KC-C150U_Eng_N.indd 14 07.11.7 1:25:43 PM