SMC Networks Barricade Cable/DSL Router - Manual (Page 27)

-26-
3. Choose the “PRTmate: (All-in-1)” from the list attached under the Print To item. Be
sure that the Printer Driver item is configured to the correct driver of your server
printer.
4. Click the Port Settings button:
Type in the IP address of the Barricade and then click the OK button.
5. Make sure that all the settings mentioned above are correct, then click the OK button.
5.2 Configuring on Windows NT Platforms
The configuration procedure for a Windows NT platform is similar to that of Windows
95/98 except the screen of printer Properties: