Moving the picture on the screen – Sharp Aquos LC 32G4U User Manual

Page 63

Advertising
background image

63

Useful adjustment settings

Moving the picture on the screen

You can move the picture around on the screen.

Press a/b/c/d to move an image on the screen to
the desired position. Press ENTER to return to the initial
image position.

NOTE

• While pressing a/b/c/d, an on-screen image,

“Adjusting Position” displays to the desired position.

• This setting cannot be stored. Once the System shuts

down or enters standby mode, the setting is erased. To
move the picture around the screen again, you must
perform the above procedure again.

• The image position setting using the steps on page XX

can be stored. Select either according to your objectives.

• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and

“INPU5” can each adjust the image position setting on
this page. The same for view modes.

• An on-screen image from PC and card cannot be moved

around.

• Even when the image fills the screen, its position can be

adjusted with this function.

• Initialize the image position by pressing ENTER.

Advertising
This manual is related to the following products: