Sharp Aquos LC 32G4U - Manual (Page 89)

89
Other viewing options
Presetting remote control function
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function for your
remote control unit.
Presetting manufacturer codes
Press FUNCTION to match the device to
which you want to preset the remote control
code.
Press EDIT and 1 at the same time.
• LED flashes continuously.
Press 0 – 9 to enter the manufacturer code.
(See page XX.)
• Preset mode is finished once the LED no longer
lights up.
NOTE
• To stop the EDIT mode in the middle, press EDIT once
more.
• If FUNCTION is pressed while in EDIT mode, EDIT mode
will be canceled.
• If there is no operation for over 1 minute running, exit this
mode.
• When you enter a code that is not listed, LED flashes
quickly.
• The initial mode is “00”.
1
2
3