Sensory Science DDV9150 - Manual (Page 62)

52 DDV 9150 USER ’S GUIDE
Sequential/Loop Recording
You can insert two tapes in
your Dual-Deck VCR and have
them record sequentially or in
a continuous loop. This will
allow you to record up to 18
hours of programming in SLP
mode. Loop recording is useful
for continuous recording of
security cameras. 1
2
3
Open “Setup Menu”
Press and hold the Menu button for 3 seconds.
Select “Copy/Record Settings”
Press 2.
Set “Record Mode”
Press 7 repeatedly to set Record Mode to:
• Normal — Tapes record normally (default
setting).
• Sequential — The tape in Deck 1 will record
to the end, then the tape in Deck 2 will
record to the end.
• Loop — The tape in Deck 1 will record to
the end, then the tape in Deck 2 will record
to the end. While Deck 2 is recording, the
tape in Deck 1 will rewind to the beginning.
This process will repeat continuously until
you press Stop on the deck in Record.
DECK1 DECK2
MENU
0000 9A
/
¥E NT ER
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move = Sel MENU=Quit ➔
➔ ➔
➔
1 2 3
4 5
7 8 9
AUTO
SHUTTLE
TRK TRK
POWER
C OP Y TAPE
SLOW
6
¥TV
¥CABLE
¥DSS
VCR
1 2 3
4 5
7 8 9
AUTO
SHUTTLE
TRK TRK
POWER
C OP Y TAPE
SLOW
6
¥TV
¥CABLE
¥DSS
VCR
COPY AND RECORD SETTINGS
1 : Copy Mode Auto
2 : Speed Matching On
3 : Copy Audio Insert Off
4 : Date/Time Stamp Timer
5 : Deck1 Rec Source Auto
6 : Deck2 Rec Source Auto
7 Record Mode Normal
____________________________________
/ = Move = Sel MENU=Quit ➔
➔
➔
➔
Normal
Sequential
Loop
COPY AND RECORD SETTINGS
1 Copy Mode Auto
2 : Speed Matching On
3 : Copy Audio Insert Off
4 : Date/Time Stamp Timer
5 : Deck1 Rec Source Auto
6 : Deck2 Rec Source Auto
7 : Record Mode Normal
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
➔