Samsung ML-3560 Series - Manual (Page 10)

ix
Every country has different restrictions on the use of wireless
devices. Since your system is equipped with a wireless device,
when traveling between countries with your system, check
with the local Radio Approval authorities prior to any move or
trip for any restrictions on the use of a wireless device in the
destination country.
If your system came equipped with an internal embedded
wireless device, do not operate the wireless device unless all
covers and shields are in place and the system is fully
assembled.
Wireless devices are not user serviceable. Do not modify them
in any way. Modification to a wireless device will void the
authorization to use it. Please contact manufacturer for
service.
Only use drivers approved for the country in which the device
will be used. See the manufacturer System Restoration Kit, or
contact manufacturer Technical Support for additional
information.
Replacing the Fitted Plug (for UK Only)
I MPORTANT
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp
plug and has a 13 amp fuse. When you change or examine the fuse, you
must re-fit the correct 13 amp fuse. You then need to replace the fuse cover.
If you have lost the fuse cover, do not use the plug until you have another
fuse cover.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be
suitable. However, some buildings (mainly old ones) do not have normal 13
amp plug sockets. You need to buy a suitable plug adaptor. Do not remove
the moulded plug.
W ARNING
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric
shock if you plug it into a socket.
I MPORTANT WARNING : You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug,
do the following:
You must connect the green and yellow wire to the pin marked by the letter
“E” or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N”
or colored black.
You must connect the brown wire to the pin which is marked with the letter
“L” or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution
board.
E U D e c l a r a t i o n o f C o n f o r m i t y ( R & T T E )
W e , S a m s u n g E l e c t r o n i c s C o ., L t d .
d e c l a r e u n d e r o u r s o l e r e s p o n s ib i li t y t h a t t h e p r o d u c t
L a s e r B e a m P r in t e r
m o d e l " K T 3 5 M P B , P h a s e r 3 5 0 0 "
t o w h ic h t h is d e c la r a t io n r e l a t e s i s i n c o n f o r m i t y w i t h
R & T T E D ir e c t i v e 1 9 9 9 / 5 / E C ( A n n e x )
L o w V o l t a g e D ir e c t iv e 7 3 / 2 3 / E E C
E M C D ir e c t i v e 8 9 / 3 3 6 / E E C , 9 2 / 3 1 / E E C
B y a p p li c a t io n o f t h e f o l lo w in g s ta n d a r d s
RF : EN 300 328 V1.4.1 EN 301 893 V1.2.3
LVD : EN 60950-1:2001+A11
EMC : EN 55022:1998+A1:2000+A2:2003 EN 55024:1998+A1:2001+A2:2003
EN61000-3-2:2000 EN61000-3-3:1995+A1:2001
EN 301 489-1 V1.6.1 EN 301 489-17 V1.2.1
( M a n u fa ctu re r)
( R e p re se n tative in th e EU )
Sam sung Electronics Co., Ltd.
#259, Gongdan-Dong, Gum i-City
Gyungbuk, Korea 730-030
2005-08-24
(place and date of issue) (nam e and signature of authorized person)
2005-08-24
Sam sung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony W ay
Yateley, Ham pshire,
GU46 6GG, UK
Wh an -So o n Yim / Sen ior Man ager
Yo n g -Sang Park / Man ag er
(place and date of issue) (nam e and signature of authorized person)
o f Sam sung Electronics Co., Ltd.
#259, Gongdan-Dong, Gum i-City, Gyungbuk , Korea 730-030
o f Shandong Sam sung Telecom m unications Co., Ltd.
Sanxing Road, W eihai Hi-Tech, IDZ Shandong Province, China 264209
(factory nam e, address)