Samsung ML-3560 Series - Manual (Page 31)

Using the Control Panel
3.10
Config
Netware
You can set this item only when you set
Netware to On. This item lets you select
whether or not you set the frame type
parameter. Select Yes to select the frame
type.
If you select Yes, the IPX Frame Type
option appears on the display.
IPX Frame
Type
You can select this item only when you set
Config Netware to Yes. This item lets you
select the IPX frame type.
• Auto: You can set the frame type
automatically.
• EN_8023: Select this value to use the IEEE
802.3 frame type.
• EN_II: Select this value to use the
ETHERNET II frame type.
• EN_8022: Select this value to use the IEEE
802.2 frame type.
• EN_SNAP: Select this value to use the SNAP
frame type.
Reset
Network
This item reboots the network interface card.
Default Set
This item performs a simple reset and
restores the factory default settings for the
network configuration. This setting will only
take effect after you have reset the printer.
Print Net CFG This item print a page showing the network
parameters you set.
Item Explanation
Values: Yes, No*
Values: Auto*, EN_8023, EN_II, EN_8022,
EN_SNAP