Sanyo TLS-224P - Manual (Page 24)

SETTING THE SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertenly.
1
While holding the TRACKING/V.STILL + button,
press the REC/PLAY SPEED button.
° “ ö ” is displayed on the digital display.
To cancel the security lock, while holding the
TRACKING/V.STILL + button, press the
REC/PLAY SPEED button, “
ö ” will be erased from
the digital display.
NOTES:
•
While the security lock is engaged all commands,
except the one to cancel the security lock, are
disabled.
•
The security lock cannot be engaged while a menu is
displayed.
SETTING THE BUZZER
If desired a buzzer can warn you when an alarm
recording is taking place, when the tape has reached
the end or when buttons are being pressed on the VCR.
1
Press the AUDIO ON/MENU button until the (SET
UP 2) menu.
2
Press the ] button, until the desired item for which
the buzzer function will be set is flashing.
3
Press the l (or j ) button to set “Y” for the
functions described below.
ALARM IN . . . . . . The buzzer will be heard
during alarm recording.
TAPE END . . . . . . The buzzer will be heard
when the end of the tape is
reached during recording.
KEY IN . . . . . . . . . The buzzer will be heard
when one of the VCR
buttons is pressed.
4
Press the PAUSE/SCAN button, the normal screen
is displayed.
° The setting procedure is now completed.
NOTES:
•
If “N” is set, the buzzer will not be heard.
•
During timer recording mode, security lock engaged
mode and alarm recording mode, the buzzer will not
be heard when a button related to one of these
modes is pressed, even if “Y” is set for the “KEY IN”
item.
<SET UP 2>
öDISPLAY
DATE Y
TIME Y
ALARM COUNT Y
SPEED Y
öBUZZER
ALARM IN Y
TAPE END Y
KEY IN N
GB
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998
English 23