Sony PCWA-C500 - Manual (Page 14)

14
If your computer is already turned on when you insert the Wireless LAN
PC card, the driver installation wizard starts automatically. Refer to the
Quick Start Guide for details on driver installation.
To remove the Wireless LAN PC Card:
1
Close any software that is using the Wireless LAN.
2
Stop PC Card Services on the taskbar or in Control Panel.
3
Remove the Wireless LAN PC Card, following the
instructions in your computer’s manual for removing PC
cards.
Notice for users who have a computer with an upper and a
lower PC card slot
Notes
• If your computer has an upper and a lower PC card slot, use the upper slot for the
Wireless LAN PC Card. If you insert the card into the lower slot, the card's antenna
may block the upper slot.
• If you insert the Wireless LAN PC Card into a slot other than the one you usually use,
the computer treats the card as a new device and automatically begins installing device
drivers for it. Completing the driver installation makes it possible to use the Wireless
LAN PC Card in that slot. Refer to the Quick Start Guide for details on how to install
the Wireless LAN PC Card driver. (See page 23 for instructions on how to uninstall the
Wireless LAN PC Card.)
z Hint
If you are using Windows Me or Windows 2000, you can register up to eight networks for
each PC card slot. However, you have to register each network individually. You cannot
share the settings.