Sony HTSS1000P. - Manual (Page 5)

5 GB
E:\SEM_Janet\Year2006\Revision_Data\Revision1_SS1000P\JC060000_2681272121SS1000P_
GB\2681272121\GB03CON_HT-SS1000P-CEL.fm masterpage: Right
Gettin
g
Sta
rted
model name1[HT-SS1000P]
2-681-272-12 (1)
About the indicators on the display
L C R
SL SR SW
D.RANGE
RDS
ST MONO
MEMORY
S
SLEEP DIGITAL
DTS PL LFE
OPT COAX
2 1 3 4 5 6
7 8 9 q; qa qs qd
Name Function
A Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B SLEEP Lights up when the sleep timer is
activated (page 47).
C Playback
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D ;DIGITAL Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you have
made digital connections and the
audio input mode for VIDEO 2
input or SA-CD/CD input is not
set to “V2 ANLG” or “CD
ANLG” (page 34).
LFE
L C R
SL SR SW
Name Function
E Preset
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 44.
F D.RANGE Lights up when dynamic range
compression is activated (page
29).
G Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 41), etc.
H MEMORY Lights up when a memory
function, such as Preset Memory
(page 44), etc., is activated.
I COAX Lights up when the DVD input is
selected.
J OPT Lights up when
– audio input mode for VIDEO 2
input is set to “V2 AUTO” and
the source signal is a digital
signal being input through
VIDEO 2 OPT IN jack (page
34).
– audio input mode for SA-CD/
CD input is set to “CD AUTO”
and the source signal is a
digital signal being input
through SA-CD/CD OPT IN
jack (page 34).
– audio input mode for VIDEO 2
input or SA-CD/CD input is set
to “V2 OPT” or “CD OPT”
(page 34).
continued
GB01COV_HT-SS1000P-CEL.book Page 5 Wednesday, March 22, 2006 8:44 AM