Sony CDP-CE525 - Manual (Page 6)

Getting Started
6
What cords will I need?
• Audio cord (1) (Use the cord supplied with the player to be
connected.)
• Monaural (2P) mini-plug cord (1) (not supplied)
1
Connect the players with an audio cord (see also
“Hookups” on page 5).
2
Connect the players with a monaural (2P) mini-
plug cord.
Connecting Another CD Player
If you have a Sony CD player in which 5, 50, or 200
discs can be inserted and which is equipped with the
CONTROL A1 jack and the command mode of that
player can be set to CD 3, you can control that player as
the second player with this unit. After connecting this
unit and an amplifier, follow the procedure below.
Be sure to turn off the power of each player before
making this connection.
CDP-CX200, etc.
CDP-CE525
To 2ND CD IN
CDP-CX200, etc.
To an AC outlet
To an AC outlet : Signal flow
To audio input
To audio output
To LINE OUT
Amplifier
CDP-CE525
CDP-CX200, etc. CDP-CE525
For details on this connection, refer to the
supplementary “S-Link
TM /CONTROL-A1 Control
System” instructions.
3
Set the COMMAND MODE selector of each
player.
Set the COMMAND MODE selector of this player
to CD 1 or CD 2, and set that of the second player
to CD 3.
To an AC outlet
For details on how to operate the second player,
see “Controlling Another CD Player” on page 18
and “Playing Alternately” on page 20.
COMMAND
MODE
To S-LINK/
CONTROL A1 S-LINK
CONTROL A1
CONTROL A1
COMMAND
MODE
CD
1 3 2
To CONTROL A1
LINE
IN OUT
L
R
LINE OUT
L
R
2ND
CD