Sony DR BT160IK - Manual (Page 34)

DR-BT160iK_CED [US, ES] 4-108-812-42(1)
  US US
DR-BT160iK_CED [US, ES] 4-108-812-42(1)
  US US
• Microwaves emitting from a Bluetooth
device may affect the operation of
electronic medical devices. Turn off
this unit and other Bluetooth devices in
the following locations, as it may cause
an accident.
–
where inflammable gas is present,
in a hospital, train, airplane, or a
petrol station
– near automatic doors or a fire alarm
• This unit supports security capabilities
that comply with the Bluetooth
standard to provide a secure
connection when the Bluetooth
wireless technology is used, but
security may not be enough depending
on the setting. Be careful when
communicating using Bluetooth
wireless technology.
• We do not take any responsibility
for leakage of information during
Bluetooth communication.
• Connection with all Bluetooth devices
cannot be guaranteed.
– A device featuring Bluetooth
function is required to conform to
the Bluetooth standard specified
by Bluetooth Sig, Inc. and be
authenticated.
– Even if the connected device
conforms to the above mentioned
Bluetooth standard, some devices
may not be connected or work
correctly, depending on the features
or specifications of the device.
• Depending on the device to be
connected, communication may take
some time.
On safety
• Do not drop, hit, or otherwise expose
the product to strong shock of any
kind. This could damage the product.
• Do not disassemble or attempt to open
any parts of the product.
On placement
• Do not place the product in any of the
following locations.
– Direct sunlight, near a heater, or
other extremely high-temperature
location
– Dusty location
– An unsteady or inclined surface
– Location exposed to large amounts
of vibration
– Bathroom or other high-humidity
location
– In a car subject to the direct rays of
the sun
Note on using in a car
Do not attempt to connect this
product, or to operate this product,
an audio output device or a car radio
while driving or waiting at a traffic
signal.
Cleaning
Clean the product with a soft, dry
cloth, or a soft cloth lightly moistened
with a mild detergent solution. Do not
use any type of solvent, such as alcohol
or benzene, which may damage the
finish.