Star Micronics IFBD-HW03/04 - Manual (Page 40)

IFBD-HW03/04 Product Specifications Rev. 0.00
3.5.3. Self-Diagnosis Function Specifications
This product can print the results of a self-diagnosis and contents of the internal settings.
A self-diagnosis print is performed after a test print of the printer when the printer is started.
Example Self-diagnosis Print
01234567890123456789012345678901234567890
+---------------+---------------+---------------+---------------+
Star Micronics IFBD-HW03/04 Ver 1.0.0
Copyright (C) 2004 STAR MICRONICS CO.,
LTD.
Copyright (C) 2004 silex technology, I
nc.
*** Diagnostic report ***
ROM Check
: Ok
ROM stat : xxxx FFFF 0000 0000
NIC Check : Ok
NIC Addr : 00:80:92:12:34:56
EEPROM Check : Ok
EEPROM Check : xxxx xxxx 0000 0000
Wireless LAN status : AP Connected
Current SSID
: STAR-WIFI
Current BSSID : xx:xx:xx:xx:xx:xx
Current Channel : 5 (1-14)
Region Code : 42
*** Configuration report ***
[Web Page Refresh Interval(sec.)]
:10
<< Configure General >>
[Change root Password]
:""
[NIC Reset Control]
:ENABLE
<< Configure WiFi – .11b >>
[Wireless Mode]
:Infra.
[SSID]
:"STAR-WIFI"
[Channel]
:11
[Use WEP]
:None
[WEP Key]
:""
<< Configure TCP/IP >>
[DHCP/BOOTP]
:ENABLE
[RARP]
:ENABLE
[IP Address]
:0.0.0.0
[Subnet Mask]
:0.0.0.0
[Default Gateway]
:0.0.0.0
[Universal PnP]
:DISABLE
[9100 Multi Session]
:ENABLE
<< Configure TCP/IP - DNS >>
[Primary Server]
:0.0.0.0
[Secondary Server]
:0.0.0.0
<< Configure TCP/IP - POP >>
[POP Protocol]
:DISABLE
<< Configure TCP/IP - SMTP >>
[SMTP Protocol]
3-33