Star Micronics IFBD-HW03/04 - Manual (Page 44)

IFBD-HW03/04 Product Specifications Rev. 0.00
3.6.6. SNMP Settings
Variable Name Setting Range Initial Value (Default Settings)
Authentic Community Max. 15 char. of ASCII “public”
Trap Community Max. 15 char. of ASCII (Japanese lang. OK) “public”
Trap Address (IP) 0.0.0.0 to 255.255.255.255 0.0.0.0
SysContact Max. 78 char. of ASCII (Japanese lang. OK) None
SysName Max. 78 char. of ASCII (Japanese lang. OK) None
SysLocation Max. 78 char. of ASCII (Japanese lang. OK) None
EbableAuthenTrap 1/2 2
3.6.7. Secure Print Settings
Variable Name Setting Range Initial Value (Default Settings)
Secure Print ENABLE/DISABLE ENABLE
SSL Mode ALL
RC4-40
RC4-128
DES-40
DES-64
3DES-192 ALL
3.6.8. RAS Counter Settings
Variable Name Setting Range Initial Value (Default Settings)
Compare Value 0-99,999,999 = 0x00000000-0x05F5E0FF 99,999,999
Send Mail ENABLE/DISABLE DISABLE
To Address Max. 78 char. of ASCII None
Check Interval(min.) 1-10000 10
Offline ON/OFF OFF
Paper Empty ON/OFF OFF
Fault ON/OFF OFF
3.6.9. Memory Switch Settings
Variable Name Setting Range Initial Value (Default Settings)
Code Page Setting Select from list Normal
Black Mark Sensor ENABLE/DISABLE DISABLE
3.6.10. SSL Identification Creation Settings (Web Only)
3.6.10.1. Identification Information Settings
Variable Name Setting Range Initial Value (Default
Settings)
Country/Region Code 2-character character string Blank
Prefecture Name 128-character character string Blank
City or Town Name 128-character character string Blank
Organization Name 64-character character string Blank
Section Name 64-character character string Blank
General Name 64-character character string Blank
Mail Address 128-character character string Blank
3.6.10.2. Time Limit Settings
Variable Name Setting Range Initial Value (Default Settings)
Date of Issue Display Only Cannot be set because automatically generated
Time Limit Date to 2049/12/31 2049/12/31
3-37