Sony SLV-ED70MN - Manual (Page 45)

Editing 45
SLV-ED70MN (E) 3-865-382-11(1)
Connecting to a VCR or stereo system
How to connect to record on this VCR
How to connect to a stereo system
Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510KS audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If you connected this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
Tips
• If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks,
connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both
right and left channels. When connecting to the AUDIO R (red) jack, the sound is
recorded only on the right channel.
• You can also use the LINE-1 IN or LINE-3 IN (SAT IN) jacks instead. If the other
VCR is a monaural type, the sound is recorded only on the channel whose jack is
connected to the audio plug. To record on both right and left channels, connect the
audio plugs to the AUDIO R/L jacks using a VMC-910HG audio/video cable (not
supplied).
This VCR (Recorder)
VMC-810HG audio/video cable (not supplied)
LINE-2 IN
Other VCR (Player)
LINE OUT
TV
: Signal flow
Editing
6/45-47_SLV-ED70MN.12E 1/17/01, 2:31 PM 45