Sony SLV-ED70MN - Manual (Page 8)

8 Getting Started
SLV-ED70MN (E) 3-865-382-11 (1)
SP
APC
RF CHANNEL
RF CHANNEL
Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
PROGRAM +/– RF CHANNEL
1/u ON/STANDBY
If your TV system is Select
B/G G
I I
D/K K
1
Press 1/u ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR picture.
This channel will now be referred to as the video channel.
Some TV has the programme position, such as 0, that is reserved for
a VCR. In this case, select that programme position for the VCR
picture. Refer to the instruction manual of your TV for details.
4
Press RF CHANNEL.
The TV system indicator appears in the display window.
Press PROGRAM +/– to select the correct TV system.
Selected TV system
ON/STANDBY
– PROGRAM +
SP
APC
3/04-18_SLV-ED70MN.12E 1/17/01, 2:29 PM 8