Sealife DC 600 - Manual (Page 50)

Digital Camera >>
48
Cancelling the Protection
To cancel protection for only one image, display the image that you want
to remove the image protection.
1. Select [Protect] with the / buttons from the playback menu,
and press the SET button.
2. Select [Single] or [All] with the / buttons, and press the
SET button.
3. Select [Cancel Protect] with the / buttons, and press the
SET button.
The removal of image protection is executed and the camera returns
to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the / buttons from the playback menu, and
press the SET button.
2. Select [Select] with the / buttons, and press the SET button.
The images are displayed in the thumbnail display.
3. Select the image you want to protect with the / / / buttons,
and press the button.
The protect icon [ ] is displayed with protected images. Selecting
a protected image and pressing the button again will cancel the
protection. This procedure is repeated to select multiple images.
4. Press the SET button.
Protection and cancellation the protection are executed and the
camera returns to playback mode.
Formatting the SD card undoes the protection, and erases all
images.