Sharp Aquos LC 45GD7U - Manual (Page 74)

74
Other viewing options
NOTE
• Sometimes the name of the program is not broadcast. In
that case, the program name will not be displayed.
Viewing information of the program
You can view information about a program you are
currently watching.
Press INFO while watching a broadcast.
• Information of the current program will be
displayed.
1
American Family – – – Journey of Dreams PBS
20:00 21:00
WGBH-HD 2.1
Sample program information
Press FREEZE .
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press
FREEZE .
Update the still image by pressing ENTER .
• Each time you press ENTER , the image on the
right screen updates.
Press FREEZE to exit still image.
NOTE
• This function does not work in INPUT 4 (HDMI) and INPUT
5 (DVI-I).
• When this function is not available, “No displaying still
image available” will display.
• The still image is automatically erased after 30 minutes.
• If you are using freeze function and a broadcast activates
the V-CHIP BLOCK, freeze function will be cancelled and
a V-CHIP BLOCK message will appear.
FREEZE
1
2
3
Picture and still image
You can display two same-sized pictures – one moving
and one still.
Icon Description
Digital copying prohibited
One digital copy only
• If the program you are receiving is copy-
protected, an icon will be displayed in the
program information. Recording digital
programs via i.LINK, or recording digital audio
via digital audio output terminals, is restricted.
Presetting remote control function
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function for your
remote control unit.
Presetting manufacturer codes
Press FUNCTION until the LED for your
device lights up.
After the LED for your device lights up, if you
press
FUNCTION and DISPLAY and enter
the code registration mode, the LED will
blink.
Press 0 – 9 to enter the manufacturer code.
(See page 75.)
• Preset mode is finished once the LED no longer
lights up.
1
2
3
After registering the code, the LED will stop
blinking then turn off after one second. (If
you perform an incorrect operation, the LED
will blink quickly then turn off.)
4