Sharp TINSE0568AWZZ - Manual (Page 35)

35
IM-DR580H
03/10/15 IM-DR580H(E)4.fm IM-DR580H(E) TINSE0568AWZZ
R
ecor
d
in
g
-A
d
v
a
n
c
e
d Re
c
o
rd
ing-
<When recording from a microphone>
Notes:
" The interval between marks may vary slightly com-
pared with the actual recording time.
" Whilst recording, a change in the numbering setting is
applied immediately.
Auto mark indicator on the remote control:
You can check the setting for auto track numbering.
2. In digital recording, tracks will be numbered as fol-
lows:
When recording from a CD or a MiniDisc using the digital
connection, track numbers will be created at the same
points as on the CD or MiniDisc (synchro marker func-
tion).
Notes:
" Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
" When recording, if a programmed playback is per-
formed by the source or playback is performed by
selecting tracks manually, the MiniDisc track numbers
may not be the same as on the source.
" In digital recording, track numbers may not be created
depending on the connected stereo system.
1
Press the REC button.
2
Press the MENU button.
The unit enters the menu select
mode.
3
Select "MARK" by pressing
the or button and press
the ENTER/-USB ( ) button.
4
Select the desired interval by
pressing the or button
and press the ENTER/-USB
(
) button.
OFF No track numbers are created auto-
matically.
TIME 10min A new track number is created ev-
ery 10 minutes.
TIME 5min A new track number is created ev-
ery 5 minutes.
TIME 3min A new track number is created ev-
ery 3 minutes.
Auto mark indicator ON: Set
OFF: Disabled
First track Second track Third track
Track A Track B Track C
Playback
side
First track Second track Third track
Track A Track B Track C
Recording
side
3