Maintenance, Ref e rences – Sharp TINSE0568AWZZ User Manual

Page 83

Advertising
background image

83

IM-DR580H

03/10/15 IM-DR580H(E)9.fm

IM-DR580H(E) TINSE0568AWZZ

Ref

e

rences

-T

ro

ub

le

s

hoot

in

g/

M

a

inte

na

nc

e

-

! If trouble occurs

When this product is subjected to strong external interfer-
ence (mechanical shock, excessive static electricity, abnor-
mal supply voltage due to lightning, etc.) or if it is operated
incorrectly, it may malfunction.

Should a failure occur, the lid may not open by sliding the
OPEN lever.

If such a problem occurs, do the following:

! Moisture condensation

When the unit has condensation inside, the disc signals can-
not be read, and the unit may not function properly.

In the following cases, condensation may form inside the
unit.

" Shortly after turning on a heater.

" When the unit is placed in a room where there is exces-

sive steam or moisture.

" When the unit is moved from a cool place to a warm

place.

To remove condensation:

Remove the MiniDisc and leave the unit for approximately 1
hour. The condensation should evaporate and the unit will
work properly.

Maintenance

! Cleaning

When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external sur-
faces only).

Clean the plugs and the connecting sockets.

" If the plugs or sockets are dirty, noise may be heard.

Cleaning will prevent noise.

" Clean them periodically with a dry cotton swab (do not

use water or alcohol).

Caution:

" Do not use chemicals for cleaning (petrol, paint thin-

ner, etc.). It may damage the cabinet finish.

" Do not apply oil to the inside of the unit. It may cause

malfunctions.

Editing is not possible.

" Are the PC and the MD portable recorder connected

improperly?

" Is the MD recorder in the hold mode?

" Is a commercial playback-only MD inserted?

1. Unplug the AC adaptor from the wall socket.
2. Remove the battery.
3. Leave the unit completely unpowered for approximately 30

seconds.

4. Plug the AC adaptor back into the wall socket.
5. After about 30 seconds, press the

button as a test.

9

Advertising