Sony CMT-HX70BTR - Manual (Page 41)

CMT-HX70BTR/HX50BTR.GB.3-294-004-12(1)
41 GB
O
thers
Speaker (SS-CHX70 for CMT-HX70BTR)
Speaker system: 2 way speaker system, Bass
reflex
Speaker units: Woofer 13 cm, glass fiber
cone type, Tweeter 2.5 cm, soft dome type
Rated impedance: 4 ohms
Dimensions (w/h/d): Approx. 172 Ч 331 Ч
225 mm
Mass: Approx. 3.7 kg
Speaker (SS-CHX50 for CMT-HX50BTR)
Speaker system: 2 way speaker system, Bass
reflex
Speaker units: Woofer 12 cm, cone type,
Tweeter 4 cm, cone type
Rated impedance: 6 ohms
Dimensions (w/h/d): Approx. 146 Ч 262 Ч
200 mm
Mass: Approx. 2.2 kg
General
Power requirements
European and Russian models:
220  240 V AC, 50/60 Hz
Canadian model: 120 V AC, 60 Hz
Mexican model: 127 V AC, 60 Hz
Australian model: 220  240 V AC,
50/60 Hz
Korean model: 220  240 V AC,
50/60 Hz
Latin American models (except for
Mexican model):
120  127, 220  240 V AC,
50/60 Hz, adjustable with voltage
selector
Other models:
220  240 V AC, 50/60 Hz
Power consumption
CMT-HX70BTR: 50 watts
CMT-HX50BTR: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 305 Ч 116 Ч 225 mm
Mass (excl. speakers): Approx. 2.8 kg
Supplied accessories: Remote Commander
(RM-AMU009) (1), R6 (Size AA) batteries
(2), AM loop antenna (1), FM lead antenna
(1), Speaker pads (8), Speaker cable (2)
(CMT-HX70BTR only), DIGITAL MEDIA
PORT adapter (TDM-iP10 (M)) (For
Canadian model and European model
(except for Russian model))
Design and specifications are subject to
change without notice.
 Standby power consumption:
0.5 W
 Halogenated flame retardants
are not used in the certain
printed wiring boards.
 Halogenated flame retardants
are not used in cabinets.