Sun Microsystems 1500 - Manual (Page 3)

Chapter 13 Replacing Chassis Components 13-15
You can also view an animated version of these instructions by clicking on
this film icon.
13.3.1 Identifying the Rear Fan
The front and rear fans on the Sun Blade 1500 workstation are contained in green
brackets. Both fans must be operating to adequately cool the components in a closed
chassis. Both fans are connected to the motherboard with a cable that carries power
and signal.
FIGURE 13-14 shows the location of and identifies the rear fan.
Note – Though similar in appearance, the front and rear fan brackets are not
interchangeable.
FIGURE 13-14 Rear Fan Location and Identification
Catch
Gap
Gap
Tabs (4)
Latch
Connector
FAN1 SYS