Sun Microsystems 1500 - Manual (Page 6)

Chapter 14 Replacing Internal Cables 14-15
3. Disconnect the IDE power cables from the upper hard drive HDD0 .
See FIGURE 14-12 .
FIGURE 14-12 Disconnecting the IDE Power Cable From the Hard Drive(s)
4. If installed, disconnect the IDE power cable from the lower hard drive HDD1 .
See FIGURE 14-12 .
5. Disconnect the IDE power cable from the DVD-ROM drive.
See FIGURE 14-13 .
FIGURE 14-13 Disconnecting the IDE Power Cable From the DVD-ROM Drive
IDE power cable
Connector
IDE PWR
Interface cable
IDE power cable
DVD-ROM
drive