SMC Networks SMCWAA-B - Manual (Page 35)

34
6. Select a profile by clicking on the relevant tab. IMPORTANT: DO NOT
APPLY THE PROFILE YET.
7. Activate the profile by clicking the Make Active button.
8. Now save the Profile by clicking the Apply button.
9. Click
the Close button to return to the main SMCWAA-B Maintenance Utility
window.
10. Change your wireless settings back to the required settings for your
network.
11. In the SMCWAA-B Utility, click the Discover... button. The SMCWAA-B
should be displayed in the main panel as being available on your network.
Section 7.3 | Viewing Existing Network Profiles
To view the details of existing network profiles:
1. From the main SMCWAA-B Utility window, select a Wireless Audio Adapter
from the list and click the Configure... button.
2. The Factory defaults profile is displayed. Click on the other tabs to
display alternative profiles, if any. Note that the currently active profile has
the Make Active button greyed out (disabled) and an “Active Profile” icon
in the top right corner of the screen.
Section 7.4 | Activating a Different Network Profile
To activate a different profile for a Wireless Audio Adapter:
1. Use the remote control device to select the profile directly on the Wireless
Audio Adapter OR
2. From the SMCWAA-B Utility, display the desired profile and click the Make
Active button.
Section 7.5 | Verifying Wireless Audio Adapters Available on the
Network
In addition to the application performing an automatic discovery on startup, you
can verify which Wireless Audio Adapters are available on the network at any
time. This function should always be performed following changes to a Wireless
Audio Adapter profile.
To verify which Wireless Audio Adapters are on the network: