Sunbeam SR6900 - Manual (Page 5)

5
Clean setting
Turn the steam dial
to the clean setting (
•
)
to clean the steam valve.
(See the care and cleaning
section on page 10 for
instructions).
Variable steam
output (0-40g / min)
The steam dial allows you
to select the desired steam
output for each garment, or
turn the dial to the dry setting
(
°
) to iron without steam.
Fine spray mist
Pressing the spray button
produces a fine mist spray to
dampen hard to iron fabrics.
Temperature alert
The lights located between the
+/- temperature buttons indicate
when the iron soleplate has
reached the desired temperature.
Green = ready to iron
Orange = heating up
Red = too hot, cooling down
Steam indicator
Align the desired steam output
with the steam indicator.
Shot of steam (100g / min)
Pressing the shot of steam
button produces a powerful
shot of steam to remove
stubborn wrinkles.
Vertical shot of steam
Pressing the shot of steam
button whilst holding the
iron in the upright position
produces a vertical shot of
steam, ideal for steaming
curtains, suits and delicate
fabrics.
Push button temperature control
Use the + and – buttons to select
the desired temperature
setting, as displayed on the LCD.
Features of your Sunbeam
Accura
®
Iron
Figure 2