Selecting the listening position – Sony CDX-M750 User Manual

Page 20

Advertising
background image

20

Adjusting the equalizer curve

1

Press (MENU).

2

Press M or m repeatedly until “EQ Tune”
appears.

3

Press (ENTER).

4

Press < or , to select the desired
equalizer curve.

Rock y Vocal y Groove y Techno y

Custom y off

5

Press (ENTER).

6

Press < or , to select the desired
frequency.

62 Hz y 157 Hz y 396 Hz y 1.0 kHz y

2.5 kHz y 6.3 kHz y 16.0 kHz

7

Press M or m to select the desired level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
To restore the factory-set equalizer curve,
press (ENTER) for two seconds.

8

Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.

Centre of sound
field

Normal setting
(1 + 2 + 3)
Front part
(1 + 2)

Right front (2)

Left front (1)

Rear part (3)

Cancel

2

1

3

Display
window

POS
All

POS

Front

POS
Front-R
POS
Front-L
POS
Rear
POS
off

Selecting the listening
position

You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
center of the sound field no matter where you
sit in the car.

1

Press (SOURCE) to select a source (tuner,
CD, or MD).

2

Press (SOUND) momentarily until “POS”
appears.

3

Press < or , to select the desired
listening position.

All y Front y Front-R y Front-L y Rear y

off

The listening positions appear in the order
shown above.

To cancel the POS mode, select “off.”
After three seconds, the display returns to
the normal playback mode.

Advertising