Samsung SSC-5000 - Manual (Page 22)

22_ MENU setup
MENU setup
MAIN MENU
Press the [MENU] button of the keyboard and a log-in window will appear
as follows.
Using the number keys, enter the correct Operator No. and Password.
MAIN MENU will be displayed on the screen when you complete the log-in
process.
Press the item you want to control on the main menu.
Press the <EXIT> icon in the main menu to return to the camera control
mode.
If the CHECK PASSWORD item is set “Off” in the keyboard setup, press the [MENU] button. MAIN
MENU screen will directly appear without the log-in process.
If you press the [MEMU] button while the OPERATOR’s LEVEL is the MANAGER’s or
OPERATOR’s level, you cannot go into the menu.
KEYBOARD SETUP
On MAIN MENU, press <Keyboard Setup> to call the Keyboard Setup screen.
The KEYBOARD SETUP menu are constituted by 7 main items as follows.
RS-485 COMMUNICATION SETUP
On the Keyboard Setup menu, press <RS-485 Communication Setup>
and the RS-485 Communication Setup menu will appear on the screen.
The default address of the keyboard is 0.
The default Baud Rate of the keyboard is 9600BPS.
The factory default setting of Duplex of keyboard is Half Duplex.
ADDRESS SET
The address of the system keyboard can be set.
Press <Address Set> and the keyboard address input window will
appear as shown in the right figure.
Enter the address by using the number keys and press the [ENTER]
button.
Press the <EXIT> icon on lower left if you want to clear the window
without entering the address.
ADDRESS "0": For only one unit
ADDRESS "1~32": For multiple units connected together
When using multiple units that are connected together, you must select a number between 1 and 32 before use.
If the value is set to "0", this may cause communication to fail and malfunction.
When using multiple units connected together and operating two separate keyboards at the same time, the first keyboard to start
communication takes precedence.
1.
2.
3.
4.
M
M
M
M
M
1.
2.
M
M
M
Login
Operator No. Password
Clear
Enter
RS-485 Communication Setup
Keyboard
Setup
¨Address Set 0
¨Protocol (Port 1) SAMSUNG
¨Protocol (Port 2) SAMSUNG
¨Baud Rate 9600
¨Duplex Half Duplex
Keyboard
Setup
RS-485 Communication Setup
Change Password
Check Password On
Register New Operation
Camera Data Download
Camera Data Upload
System Information and Setup
Input Keyboard Address (0~32)
Clear Enter
Keyboard
Setup
MENU
MAIN
Keyboard Setup
Camera Setup
DVR Setup
000
001