Sony VRD-MC6 - Manual (Page 32)

32
Button names on the [USB SELECT] screen
z Hints
• Depending on the model, USB connection may complete simply by connecting the camera to the
DVDirect ([USB mode] screen appears). In this case, selecting the recording media is unnecessary.
• If your camera has a [USB SPEED] setting, specify [AUTO] ([AUTO] is the default setting).
Sony digital still camera
USB connection completes only by connecting the camera to the DVDirect. [USB mode]
or [Mass Storage] screen appears.
z Hints
• If your camera has a [USB Connect] setting, specify [AUTO] or [Mass Storage] ([AUTO] is the
default setting).
• If your camera has a [LUN Settings] setting, you may need to set [Single], depending on the model
(default setting is different depending on the model).
• See the following web site for details on supported camera models (English only):
http://sony.storagesupport.com
b Note
• If a camera with built-in memory and memory card is connected to the DVDirect, the DVDirect
will choose the memory card as the USB connection. However, built-in memory might be chosen
depending on the model of the camera and its setting. For details, see the instruction manual of the
camera, and confirm the settings of [USB Connect] and [LUN Settings].
b Notes
• You need an audio/video cable (AV cable), instead of a USB cable, for connection to copy:
– “PhotoMOVIE” from an 8cm disc in a Handycam
®
.
– videos from an 8cm disc formatted in VR mode in a Handycam
®
.
Storage Media Button Name
Hard disk drive [ USB CONNECT] [ COMPUTER] [ HDD], etc.
Built-in memory [ USB CONNECT], etc.
8cm disc [ USB CONNECT] [ COMPUTER], etc.
Memory Card [ USB CONNECT] [ COMPUTER], etc.