Star Micronics LC-8211+ - Manual (Page 25)

18 Control Panel Operations
Paper loading
❏
Prepare either cut-sheet or fanfold paper for feeding.
For details on how to prepare for paper feeding, see page 9 for fanfold paper
and page 59 for cut-sheet paper.
❏
The POWER indicator flashes to indicate there is no paper in the printer.
❏
When using fanfold paper, press LF to feed the paper into the printer.
When using cut-sheet paper, insert the paper into the front of the printer
using the left paper guide. The paper is automatically fed into the printer.
Line feed
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
Press LF once to feed paper one line. Holding down LF continually feeds
paper, one line at a time, until you release the button.
Paper eject (cut-sheet paper)
❏
Make sure the printer is on-line ( ON LINE indicator is lit).
❏
Press LF to eject the paper.
❏
After the paper is ejected, the printer will beep and the POWER indicator
will flash to indicate there is no paper in the printer.
Form feed (fanfold paper)
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
While holding down LF , press ON LINE to feed the paper to the top of the
next page.
Parking fanfold paper
❏
Make sure the printer is on-line ( ON LINE indicator is lit).
❏
Press LF to eject the paper.
❏
After the paper is ejected, the printer will beep and the POWER indicator
will flash to indicate there is no paper in the printer.
❏
Later, you can press LF again to feed the paper back into the printer.