Star Micronics LC-8211+ User Manual
Page 34
EDS Mode Settings 27
Switch 5: Zero Style
Specifies whether a normal zero (ON) or a slashed zero (OFF) will be used.
Selecting Normal (ON) prints zeros without lines running through them, while
Slashed (OFF) prints zeros with a diagonal slash running through them.
Switch 6: Reserved
BANK C
Switches 1, 2: Print Mode
Turn these switches on or off to select the print mode you want to use.
Switches 3, 4, 5: Print Pitch
Turn these switches on or off to form the pattern that matches the print pitch
setting you want to make.
Switch 6: Quiet
When the Quiet Mode is enabled (OFF), the printer prints with less noise than
normal printing. Though the Quiet Mode prints more quietly, it also takes
considerably longer than normal printing.
Print Mode
SW1
SW2
LQ
ON
ON
Draft
OFF
ON
Print Pitch
SW3
SW4
SW5
10cpi
ON
ON
ON
12cpi
OFF
ON
ON
15cpi
ON
OFF
ON
17cpi
OFF
OFF
ON
20cpi
ON
ON
OFF
Proportional
OFF
ON
OFF