Sony CMT-ED2 - Manual (Page 30)

30
4
Press ENTER.
“ON” appears, then the hour indication
flashes.
O N 0 0 0
5
Set the starting time.
Press l or L repeatedly to set the
hour, then press ENTER.
The minute indication begins flashing next.
O N 8 0 0
Press l or L repeatedly to set the
minute, then press ENTER.
“OF” appears, then the hour indication
flashes again.
O F 1 0 0 0
6
Set the stopping time by repeating step
5.
The starting time, the stopping time, the
recorded source, and the preset station appear
in turn, then the original display returns.
7
Insert a recordable tape with the side
you want to record on facing towards
you.
8
Press ?/1 to turn off the system.
When recording starts, the volume level is
automatically set to the minimum.
To check the settings
Press TIMER SELECT repeatedly until “c REC”
disappears, then press TIMER SELECT
repeatedly until “c REC” appears again.
The preset items appear in turn.
To turn off the REC Timer
Press TIMER SELECT repeatedly until “OFF”
appears.
To turn the timer on again
Press TIMER SELECT repeatedly until “c REC”
appears, then press ?/1 to turn off the system.
Tip
Once you set the REC Timer, the time settings will
remain in the system’s memory until you change
them, even when you turn the system or the REC
Timer off. The settings that were last used will be in
effect when you turn the timer on again.
Notes
• The system will turn on 15 seconds before the
specified starting time.
• If the power is on at the specified starting time,
recording will not occur.
• The timer will not operate if the starting time and
the stopping time are the same.
• When you have set the Sleep Timer, the REC Timer
will not operate until the Sleep Timer function is
turned off.
• You cannot operate the Daily Timer and the REC
Timer at the same time.
Timer-activated recording of
radio programs (continued)