Sony CMT-ED2 - Manual (Page 18)

18
Playing a tape
The system can play three types of tapes: Type I
(normal), Type II (CrO
2
) and Type IV (metal).
The system automatically detects the tape type so
there is no need to specify it.
To turn on the system, press ?/1.
n x
?/1
N
.m X M>
Z
+
–
2
VOLUME + / –
4 1 x X
.m / M>
TAPE nN
3
DOLBY NR
l/L
j/J
Recording from the radio
(continued)
6
Press DIR MODE to select “g” to
record on one side of the tape or “j”
to record on both sides.
7
Press S.
Recording starts on the side of the tape
facing towards you.
To stop recording
Press s.
Tips
• To record from a non-preset station, press
TUNING MODE repeatedly in step 2 until
“MANUAL” appears, then press +/– repeatedly to
tune in the desired station.
• To record with the Dolby NR system on, press
DOLBY NR before step 7. “;” appears.
• If you hear static while you are recording an AM
radio program, remove the rear cover and place the
antenna outside (see “To remove the AM antenna”
on page 6).
Note
You cannot start recording on the side facing away
from you.
?/1
(Power)