Samsung DVD-V8000 - Manual (Page 9)

GB
15
GB
14
Basic TV Tuner Operations
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
1 TV/VCR
Press to switch between your TV’s tuner and the VCR’s internal
tuner.
2 Channel Up/Down
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 100+ Button
Press to select channels 100 and higher. First, press the 100+
button, then press the remaining digits using the 0-9 buttons.
5 Previous Channel
Press to jump directly to the previously viewed channel.
6 Volume
Press to adjust the volume of the program you are watching.
• Also works in DVD and VCR mode.
7 Display
Press to display the channel you are watching.
• Also works in DVD and VCR mode.
The on-screen menu system allows you to set all functions for your
DVD-VCR. The following buttons are used to open and navigate
through the on-screen menu system.
1 SETUP Button
Press to access the DVD-VCR on-screen menu system.
2 Up/Down
Moves menu selection arrow up and down to cycle through menu
options
3 Right
Selects or changes menu options.
4 Left
Moves backward through menu options on certain screens.
5 ENTERButton
Press to confirm settings in certain menus.
6 RETURNButton
Returns to the last menu viewed or exits the menu system.
7 CLEARButton
Clears Menu options on certain screens.
On-Screen Menu Navigation
1
5
7
4
2
2
6
6
The Setup Menu is the opening
screen of the on-screen menu
system
2
3
2
4
5
Basic VHS Playback
To play a videotape, simply insert it in the VHS deck and press the
Play button. Tapes without Record Safety Tabs can be set to play
automatically when inserted; see page 47.
1 Insert VHS Tape
Insert a standard VHS videotape into the VHS Deck.
• Power will turn on automatically when you insert a videotape.
2 Play Tape
Press the
ll (Play/Pause) button on the remote control or front
panel. If the tape is missing the Record Safety Tab and Auto Play
is turned on, the tape will begin to play automatically, see page 47.
3 Stop Playback
Press the
■ (Stop) button on the remote control or front panel.
4 Eject Tape
Press the OPEN/CLOSE button on the remote control or the
EJECT button on the front panel.
5 Additional VCR Options
• For special VCR Playback features, see pages 45~47.
• For VCR Recording features, see pages 48~54.
• For Timer Recording features, see pages 55~57.
1
2
3
4
01616A DVD-V8000/TWN-Eng2 8/27/56 8:57 AM Page 14