Sony HT-AF5 - Manual (Page 30)

30 GB
When you select “DIST INFO” or
“LEVEL INFO”
You can check the speaker distance or speaker
level.
Note
The measurement result of a speaker will not appear
if the system does not recognize that the speaker is
connected.
When you have finished
Disconnect the optimizer microphone from the
subwoofer.
Note
If you have changed the position of the speakers, it
is recommended that you perform Auto Calibration
again in order to enjoy the surround sound.
You can delete the result of Auto Calibration.
If there is no saved data, you cannot perform
this operation.
1
Press AMP MENU.
“LEVEL” appears on the display.
2
Press V/v repeatedly until
“A.CAL MENU” appears, then
press
or b.
3
Press V/v repeatedly until
“A.CAL CLEAR” appears, then
press
or b.
4
Press V/v repeatedly until
“YES” appears, then press .
The saved result is deleted.
The settings for speaker distance and
speaker level return to their initials.
WARNING 41
WARNING 42 The sound received by the
optimizer microphone is out of
the acceptable range. The
distance between the optimizer
microphone and the speakers is
too close. Set them away, and
then try to perform the Auto
Calibration again.
WARNING 43 The distance and position of the
subwoofer cannot be detected.
This may be caused by noise. Try
to perform the Auto Calibration
in a quiet environment.
NO WARNING There is no warning information.
Warning code Explanation
Clearing the measurement
result