Sony HT-AF5 - Manual (Page 43)

43 GB
“BRA
VIA” Sync Fea
ture
s
Set the Control for HDMI function to off when
you connect components not compatible with
“BRAVIA” Sync, or that do not have HDMI
jack, etc.
1
Press AMP MENU.
“LEVEL” appears on the display.
2
Press V/v repeatedly until
“SET HDMI” appears, then
press
or b.
3
Press V/v repeatedly until
“CTRL HDMI” appears, then
press
or b.
4
Press V/v repeatedly until
“CTRL OFF” appears, then
press .
The Control for HDMI function is set to
off.
Playing back components
with one-touch operation
(One-Touch Play)
By a simple operation (one touch),
components connected to the system with
HDMI connections start playback
automatically.
You can enjoy the sound/image using the
connected components.
Play back a connected component.
The system and the TV are turned on
automatically and switched to the appropriate
HDMI input.
Note
Be sure that the System Audio Control setting is set
to on using the TV menu.
Watching a DVD or Blu-ray Disc
by simple operation
You can also select a connected component,
such as a DVD player or Blu-ray Disc player
using the TV menu. In this case, the system
and the TV switch to the appropriate HDMI
input.
Note
Depending on the TV, the start of the content may
not be output.
Tip
You can enjoy the components that are connected to
the HDMI jacks, even if you turn off the system.
The POWER/ACTIVE STANDBY indicator lights
up in amber.
Setting the Control for HDMI
function to off