Sony RDR-GX350 - Manual (Page 15)

15
H
ook
up
s and
Se
tti
n
gs
b Notes
• Do not connect more than one type of video cord
between the recorder and your TV at the same
time.
• Do not make connections A and E at the same
time.
• When you connect the recorder to your TV via the
SCART jacks, the TV’s input source is set to the
recorder automatically when you start playback.
If necessary, press the TV t button on the
remote to return the input to the TV.
• If you connect the recorder to a TV with
SMARTLINK, set “LINE 3 Out” to “Video” in
the “Video In/Out” setup.
• You cannot connect the HDMI OUT jack
(connection E) to DVI jacks that are not HDCP
compliant (e.g., DVI jacks on PC displays).
• Component video and RGB signals are not output
when using the HDMI connection.
* This DVD recorder incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
If the connected TV (or other connected
equipment such as a set top box) complies
with SMARTLINK, NexTView Link
*3
,
MEGALOGIC
*1
, EASYLINK
*2
,
CINEMALINK
*2
, Q-Link
*3
, EURO VIEW
LINK
*4
, or T-V LINK
*5
, you can enjoy the
following SMARTLINK features.
• One-Touch Play (page 53)
• Preset Download
You can download the tuner preset data
from your TV to this recorder, and tune the
recorder according to that data in “Easy
Setup.”
• NexTView Download
You can easily set the timer by using the
NexTView Download function on your TV.
To prepare for the SMARTLINK features
Set “LINE 3 Out” to “Video” in the “Video
In/Out” setup (page 80) and “SMARTLINK”
to “This Recorder Only” in the “Options”
setup (page 92).
b Notes
• For correct SMARTLINK connection, you will
need a SCART cord that has the full 21 pins.
Refer to your TV’s instruction manual as well for
this connection.
• Not all TVs respond to the functions above.
*1
“MEGALOGIC” is a registered trademark of
Grundig Corporation.
*2
“EASYLINK” and “CINEMALINK” are
trademarks of Philips Corporation.
*3
“Q-Link” and “NexTView Link” are trademarks
of Panasonic Corporation.
*4
“EURO VIEW LINK” is a trademark of Toshiba
Corporation.
*5
“T-V LINK” is a trademark of JVC Corporation.
By connecting Sony components that are
compatible with the HDMI Control function
with an HDMI cord (not supplied), operation
is simplified as below:
• One-Touch Play (page 53)
• System Power-Off
When you turn the TV off by using the
power button on the TV’s remote, the
components compatible with the HDMI
Control function turn off automatically.
To prepare for the ‘BRAVIA’ Theatre Sync
features
Set “HDMI Control” to “On” in the “HDMI
Output” setup (page 91). For details on TV
settings, refer to the operating instructions
supplied with the TV.
b Notes
• Depending on the connected component, the
HDMI Control function may not work. Refer to
the operating instructions supplied with the
component.
• The recorder supports only the playback option of
HDMI Control. “Player” appears on the TV
screen when using the HDMI Control functions.
About the SMARTLINK
features (for SCART
connections only)
About the HDMI Control
functions for ‘BRAVIA’ Theatre
Sync (for HDMI connections
only)