Sony RDR-GX350 - Manual (Page 95)

95
Addi
tion
al
I
nf
o
rm
at
ion
No sound is output from the HDMI OUT
jack.
, Try the following: 1 Turn the recorder off
and on again. 2 Turn the connected
equipment off and on again. 3 Disconnect
and then connect the HDMI cord again.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
, The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format. In this case, set “Audio
Output” to “PCM” in the “HDMI Output”
setup (page 91).
Sound distortion occurs.
, Set “Tuner Level” in the “Audio In” setup
to “Compression” (page 81).
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the LINE 2 OUT R-
AUDIO-L jacks, LINE 3 – TV jack, or
LINE 1/DECODER jack (page 68).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“Audio DRC” in the “Audio Out” setup to
“On” (page 83).
, Set “Tuner Level” in the “Audio In” setup
to “Normal” (page 81).
An alternate audio track cannot be
recorded or played.
, When recording from connected
equipment, set “External Audio” to
“Bilingual” in the “Audio In” setup
(page 81).
, Multilingual tracks (main and sub) cannot
be recorded on DVD+RWs, DVD-RWs
(Video mode), DVD+Rs, or DVD-Rs
(Video mode). To record the language, set
“Bilingual Recording” in the “Audio In”
setup to “A/L” or “B/R” before recording
(page 81). To record both the main and sub
sounds on a disc, record on DVD-RWs/
DVD-Rs (VR mode).
, If you have connected an audio component
to the DIGITAL OUT (COAXIAL) jack
and want to change the audio track for
DVD-RWs/DVD-Rs (VR mode) during
playback, set “Dolby Digital Output” in the
“Audio Out” setup to “Dolby Digital ->
PCM” (page 82).
The recorder does not play any type of
disc.
, The disc is upside down. Insert the disc with
the labelled side facing up.
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder.
In this case, if the recorder is on, leave it on
(if it is off, leave it off) for about an hour
until the moisture evaporates.
, If the disc was recorded on another recorder
and was not finalised (page 37), the
recorder cannot play the disc.
The recorder does not start playback from
the beginning.
, Resume play was activated (page 53).
, You have inserted a DVD whose Title menu
or DVD menu automatically appears on the
TV screen when it is first inserted. Use the
menu to start playback.
The recorder starts playing automatically.
, The DVD VIDEO features an auto
playback function.
Playback stops automatically.
, If the DVD has an auto pause signal, the
recorder stops playback at the auto pause
signal.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
, Depending on the DVD, you may not be
able to do some of the operations above. See
the instruction manual supplied with the
disc.
Playback
,continued