Loading copy paper – Sharp AR-162S User Manual

Page 12

Advertising
background image

10

GETTING ST

AR

TED

LOADING COPY PAPER

To save space, this copier has been designed with an adjustable front-loading
tray, which is easily opened for paper loading. For best results, use only
SHARP recommended paper. (See page 49.)
The paper required (

) indicator will light up when there is no copy paper

in the selected paper feed station, or when the paper tray is not installed or
is improperly installed.

1

Gently lift and pull out the paper tray until it stops.

2

Push the pressure plate down until it locks in place.

3

Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.

If you change to a different size of copy paper, the tray must be
adjusted. See the next page.

Set the paper along the guides.

The tray holds up to 250 sheets of 21 lb. bond paper.
Do not load paper above the maximum height line.

4

Push the paper tray firmly back into the copier.

Loading cop

y paper

Maximum height line

When the paper size is changed in the paper tray, the
size of the paper must be entered by steps 8 through 10
on page 12. If not, the edges of copies may become
smudged with toner. Also, the AUTO IMAGE feature will
not function properly.

Advertising