Sony SRX-S105 - Manual (Page 48)

48
Features
Ch
apt
er 1 Ov
e
rv
ie
w
Features
High Brightness, High Picture Quality
High brightness
The SRX-S110 uses two 2kW Xenon lamps as a light
source, and the SRX-S105 uses two 1kW Xenon lamps.
These compact-size Xenon lamps provide high brightness
of 10,000 ANSI lumens for the SRX-S110 and 5,000
ANSI lumens for the SRX-S105, assuring excellent
uniformity on the entire screen.
High resolution
Sony’s new, unique three SXRD™ (Silicon X-tal
Reflective Display) panels with about 8,850,000 pixels
realizes a high-resolution of 4096 × 2160 dots. The
resolution corresponds to four times that of an HDTV
image.
Multi-screen mode
The high resolution of the projector enables single-, dual-
and quad-mode projection in which full HD images can be
displayed even in each of two or four divided screens.
Images from different input sources can be displayed in
these divided screens simultaneously.
High contrast ratio
The combination of the SXRD imaging devices and 3PBS
optical devices offers a high contrast ratio of more than
1800:1.
Gamma correction circuit
Three types of gamma correction circuit, 1.8, 2.2 and 2.6,
are selectable according to the signal input, allowing
projection of an image with optimum brightness.
Color space feature
The projector supports three standards of color tonal
reproduction range, 709, DCDM and CIEXYZ, allowing
you to obtain an image with precise color reproduction
according to the input sources.
Squeeze function
A squeezed signal with a 4:3 aspect ratio is stretched
horizontally to fit a 16:9 screen, and a signal with a 16:9
aspect ratio is stretched horizontally to fit a 2.39:1 screen.
This function is available only for projection in single-
screen mode and may not work depending on the signal
type input.
Flexible and Reliable System
Dual lamp system
The projector adopts a dual lamp system for versatility of
use. You can select dual-lamp or single-lamp mode, and
can reduce each lamp’s power output. These modes allow
you to save power and increase lamp life.
Also, if one bulb burns out, the other keeps projecting
images.
Versatile Setup
Equipped with DVI-D input
The projector is equipped with DVI-D input connectors,
enabling reception of progressive DVI signals. This allows
you to project a picture for a simulation system or a large-
scale presentation only by inputting the DVI-D signals
from a computer, etc. equipped with a DVI-D output.
Various signal input
The projector is equipped with an RS232C connector and
ETHERNET connector for communication. For signal
inputs, the projector has three slots to which the optional
analog input boards, HD-SDI input boards and DVI-D
interface boards can be attached according to your
requirement.
Optional lens
Optional zoom lenses are available depending on the
projection distance you are setting up. The lens shift
function of this projector enables easy setup.
When the optional zoom lens equipped with zoom/focus
memory function is installed, you can register the zoom
and focus settings adjusted to fit the desired screen size.
Registration of the settings adjusted for screen sizes of
aspect ratio of 4:3 and 16:9 allows you to switch between
them easily with the buttons in the window of the SRX
Controller.