SMC Networks SMC7008ABR - Manual (Page 17)

17
Step 3. Obtain IP Settings From Your Barricade
Now that you have congured your computer to connect to your
Barricade, it needs to obtain new network settings. By releasing any
old IP settings and renewing them with settings from your Barricade,
you will also verify that you have congured your computer correctly.
1. From the Windows desktop,
click the “Start” button, then
“Programs,” and then select
“Command Prompt.”
2. In the “Command Prompt”
window, type “IPCONFIG /RELEASE”
and press the <ENTER> key.
3. Type “IPCONFIG /RENEW”
and press the <ENTER> key.
Verify that your IP address is
now 192.168.2.xxx, your Subnet
Mask is 255.255.255.0 and your
Default Gateway is 192.168.2.1.
These values conrm that your
Barricade is functioning.
4. Type “EXIT” and press
<ENTER> to close the
“Command Prompt” window.