Using printer in linux, Installing printer driver, A.17 – Samsung ML-1430 User Manual
Page 128: System requirements installing printer driver
A.17
A
PPENDIX
Supported OS
•
Redhat 6.2/7.0/7.1 and above
• Linux Mandrake 7.1/8.0 and above
• SuSE 6.4/7.0/7.1 and above
• Debian 2.2 and above
• Caldera OpenLinux 2.3/2.4 and above
•
Turbo Linux 6.0 and above
•
Slackware 7.0/7.1 and above
Recommended Requirements
•
Pentium II or Power PC G3
•
RAM 64 MB or higher
•
HDD 20 MB or higher
Softwares
•
Glibc 2.1 or higher
•
GTK+ 1.2 or higher
•
GhostScript
Installing Printer Driver
1
Make sure that you connect the printer to your computer.
Turn both the computer and the printer on.
2
When the Administrator Login dialog box appears, type in
“root” in the Login field and enter the system password.
Note: You must log in as a super user (root) to install the printer
software. If you are not, ask your system administrator.
System
Requirements
Installing Printer
Driver
Using Printer in Linux
3
Insert the printer software CD-ROM. The CD-ROM
automatically runs.
Note: If the CD-ROM does not automatically run, click the
icon
at the bottom of the screen.
When the Terminal screen appears, type in:
[root@local root]# cd /mnt/cdrom (the CD-ROM directory)
[root@local cdrom]# ./setup.sh